2-(4-氯苯基)-3-甲基丁酸的消旋

以酸酐及有机惰性溶剂作混合溶剂，少量叔胺等作催化剂，2-(4-氯苯基)-3-甲基丁酸能在比较温和的条件下基本完全消旋，收率接近90％。     

Preparation, Characterization and Catalytic Properties of S2O8^2-／ZrO2 Supported by Tungsten Carbide

A WC-supported S2O8^2-/ZrO2(PSZ) catalyst was prepared and characterized by means of XRD, BET, FTIR and XPS. The isomerization of n-pentane over the catalyst was investigated as well. The results show that the skeletal isomerization and the crack of n-pentane proceed simultaneously on WC-supported S2O8^2-/ZrO2 catalyst. The addition of tungsten carbide showed a significant enhancement in the activity and stability of the catalyst for n-pentane isomerization. The catalyst showed evidently a better activity than S2O8^2-/ZrO2 supported by Pt and WO3. The results can be interpreted by the existence of the tungsten oxycarbide compound(WCxOy) with carbidic, oxide and acidic sites.     

正丁烷氧化制顺酐流化床催化剂的性能

 考察了前驱体制备过程中水合肼／五氧化二钒摩尔比（以下简记\r\n为n（N2H4）／n（V2O5））对催化剂性能的影响．由较高的n（N2H4）\r\n／n（V2O5）比制得的催化剂，其（VO）2P2O7相含量较多，正丁烷转化\r\n率较高．随着n（N2H4）／n（V2O5）比的减小，δ－VOPO4相的含量逐\r\n渐增多，正丁烷转化率随之升高；而顺酐选择性开始时升高，达到最大\r\n值后逐渐降低．在n（N2H4）／n（V2O5）＝0．34时制备的催化剂最佳\r\n，在丁烷浓度为4．0％、空速为500h－1及反应温度为420℃的反应条件\r\n下，顺酐收率可达49．74％．本文中细粒床催化剂有较大的操作弹性．     

Determination of Size Distribution of Nano-particles by Capillary Zone Electrophoresis

A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied. This method for the determination of size distribution was statistical.     

一种新的液晶高分子——丁酸壳聚糖的合成与表征

甲壳素几乎不溶于任何溶剂,由于其脱乙酰化产物壳聚糖含自由氨基,能被酸质子化而溶解,所以壳聚糖的应用领域远多于甲壳素.但是壳聚糖也仅能溶于酸性介质中,并不能溶于纯水和普通有机溶剂,因而人们对甲壳素或壳聚糖进行各种化学改性[1,2],寻求溶解性更好尤其能溶于水的衍生物,以扩大其应用范围.本文按文献[2～4]方法合成了O-丁酰化壳聚糖(简称丁酸壳聚糖),首次报道它具有溶致液晶性.     

杨村烟煤快速液化反应性的研究

用共振搅拌反应器研究了杨村烟煤的高温快速液化。研究发现，在体系保持较高活性氢浓度时，适当提高反应温度，缩短反应时间——在短时间内达到较高的煤转化率,即高温快速液化是可行的。高温快速液化的最佳反应温度正是热重曲线反映的煤活泼热解温度范围的上限。从液化产物看，高温快速液化反应产物中苯可溶物占绝大多数，这对于煤液化产物的进一步利用非常有利。     

纳米晶PbTiO3负载CuO催化NO分解

A large specific surface area perovskite-type mixed oxide PbTiO₃ supported cupric oxide was synthesized as a catalyst for NO decomposition and characterized by techniques such as XPS, XRD, H₂-TPR before and after NO decomposition reactions. The catalytic properties were tested with a fix-bed micro-reactor. The results showed that the PbTiO₃ was inactive for the reactions, but 1wt % Cu/PbTiO₃ catalyst gave fairly good activities for NO decomposition at temperature as low as 473 K. Copper species were found well-dispersed but weakly interacted with the support before NO decomposition, and the NO decomposition caused significant change in the environment of the copper species, which became Cu(Ⅰ) and most probably incorporated into surface crystal lattice of the nano-sized PbTiO₃. In NO reaction, a large amount of oxygen atoms from the decomposition of NO penetrated into the nano-sized PbTiO₃ support and caused small expansion of crystal lattice. The transport of oxygen between the copper species and the catalyst support may be helpful to speed up the kinetic regeneration of active metal sites from oxygen occupancy and resulted in good catalytic performance.     

Synthesis, Crystal Structure and Inhibition of the K562 Cell Proliferation of N＇-Tertbutylaminocarbonyl-N-2-chlorophenoxyacetylthiourea

The title compound N'-tert-butylaminocarbonyl-N-2-chlorophenoxyacetylthiou- rea has been synthesized for the first time. Complete assignments were achieved by IR, 1H NHR and single-crystal X-ray diffraction analyses. The inhibitory rate of the cellular growth of K562 cells (chronic myeloid 1eukemic cells) was measured using MTT [3-(4,5-dimethylthiazo-2-y1)-2,5-di- phenyltetra-zolium bromide] assay. The cell apoptosis was assessed by agarose gel electrophoresis to find that the title compound has antiproliferation and apoptosis inducing effects on K562 cells. In order to investigate the relationship between structure and activity of the target compound, we report its crystal structure and biological behavior in the present paper. Crystallographic data: C14H18- ClN3O3S, Mr = 343.82, orthorhombic, space group Pnma, a = 19.786(6), b = 6.789(2), c = 12.938(4) , V = 1738.0(9) 3, Z = 4, Dc = 1.314 g/cm3, F(000) = 720, μ(MoKα) = 0.354 mm-1, R = 0.0378 and wR = 0.0941. The molecule is a planar structure.     

亲水性含环氧基磁性聚合物微球的制备与性能表征

选择甲酰胺作磁性Fe3O4微晶的分散剂,通过设计反相悬浮聚合体系,合成了粒径分布窄、球状亲水性含环氧基磁性聚合物(MGM).利用扫描电子显微镜(SEM)、红外光谱(FT-IR)、X射线粉末衍射仪(XRD)、振动样品磁强计(VSM)和低温N2吸附以及化学分析方法对聚合物进行了性能表征.结果表明,合成的MGM呈球形,且粒度分布较窄,粒径为0.13~0.28 mm的粒子占91%;甲酰胺分散Fe3O4,微晶表面的亲水性进一步增强,单体甲基丙烯酸缩水甘油酯和N,N′-亚甲基双丙烯酰胺交联共聚生成的胶粒能够包埋Fe3O4微晶形成胶核,胶核聚集形成均匀、稳定的MGM微球.MGM中Fe3O4含量为6.17%时,比饱和磁化强度σs达6.5 emu/g;其比表面积、平均孔径和孔容分别为117.6 m2/g,15.6 nm和0.46 cm3/g,表面环氧基团含量为0.53 mmol/g.MGM借助自身的活性环氧基团在十分温和的条件下共价偶联青霉素酰化酶(penicillin G acylase EC 3.5.1.11,简称PGA),制备的固定化酶在37℃下催化水解青霉素G钾生成6-氨基青霉烷酸(6-APA)的表观活性达502IU/g,并且在使用过程中没有出现磁聚集现象.     

海绵Phacelliafusca中含氮化合物的分离与结构鉴定

从采自中国南海西沙群岛海域的海绵Phacellia fusca Schmidt中得到4个含氮 化合物。经~1H NMR,~(13)C NMR,HMQC,HMBC,~1H-~1HCOSY,FABMS和EIMS等光谱分析 ，确证其结构分别为：N,N'-二[2-乙氧基-1（Z）-乙烯基]脲（1），2- Bromoaldisin(2),Aldisin(3)Dibromophakellin盐酸盐(4)。其中化合物1为一具有 对称结构的新脲类化合物，命名Phacelliaurea A；化合物4是首次从该海绵中分离 得到的已知胍基生物碱，首次报到了它的~(13)C NMR数据及其归属。